© ProActive Solutions 2016
ProActive Solutions…
Made with Xara
Skid Steer Certificate of Completion - CSA M3471-05 Safety Training Standards...
A ll   operators   must   demonstrate   through   theory   and   practical   hands-on   exposure,   their   ability   to   safely   operate   a   Skid   Steer   in   their work   environment(s)   through   Safe   Work   Practices   and   Procedures   as   a   Competent   Skid   Steer   Operator   in   compliance   with   both   the Occupational Health and Safety Act  & Regulations stated under the CSA M3471-05. The course also reflects requirement(s) of CSA M3471-05 Industrial Skid Steer Operator Training. Employers   are   responsible   to   ensure   the   operator(s)   be   provided   the   required   instruction   to   demonstrate   Skid   Steer   operation   Safe Work Practices and Procedures under the Occupational Health and Safety Act and Regulations.
• Operation and safety features of the Skid Steer the operator will use • Operator safety and all site specific safety issues at the work place • Maintenance, fuel sources and procedures (battery operation and propane) • Written test (maybe retaken as necessary) • Workbook provided When written test has been successfully completed, operator(s) will be scheduled for practical hands-on Skid Steer operator training and evaluation at their work environment.
Classroom Instruction... Approximately 4 hours... Final Practical Hands-on Evaluation... Approximately 30 Minutes Per Operator...
• Pre-operational inspection • Operating Skid Steer in work environment This   training   program   is   tailored   to   industrial   and   warehouse   customers,   providing   an   excellent   service   with   minimal   work   time interference.   Within   one   (1)   week   after   the   training   is   completed,   the   certificate(s)   8   ½   X   11   and   wallet   size   will   be   mailed   to   the company for which the service was rendered.   • Location for theory classroom instruction: Client work environment • Date & Time for theory classroom instruction: As per client requirement and availabilty • Location for hands-on practical demonstration by operator(s): Client work environment • Date & Time for hands-on practical demonstration by operator(s): Regular work hours at client work environment • Cost: $300.00+ 39.00HST = $339.00 X ____ Participant(s) = $ _______________ • Recertification training required every three years.